Real-time CNC machine monitoring from Autobits puts every spindle on one live screen: running, idle or down, with the count, the OEE and the cost of each stop.
FanucSiemensMitsubishiHaasLive within 1 to 2 daysInstallation included100+ CNC machinesFanucSiemensMitsubishiHaasLive within 1 to 2 daysInstallation included100+ CNC machines
Works with Fanuc, Siemens, Mitsubishi and Haas controllers. Live within 1 to 2 days. Installation included. Real-time visibility across 100+ CNC machines.
Most shops find out about a lost hour at the end of the shift, when nothing can be done. Real-time monitoring tells you while the machine is still waiting, so the hour can still be saved.
Live, not tomorrow
How real-time CNC machine monitoring works on your floor
CNC-03 · Turning centreRunning
72%OEE this shift
06:0010:0014:00
Running
Idle
Down
Illustrative figures
Status the second it changes
Each machine reports running, idle or down as it happens. The board updates without anyone walking the floor.
Waits you can still act on
An alert tells the supervisor a machine is waiting, while there is still time to send material or an operator.
Stops with a reason attached
Every stop is logged with its reason, so the same problem cannot hide behind a different name next week.
A shift report nobody had to write
When the shift ends, output, OEE and downtime are already added up and ready to read.
Live numbers, straight from the machine. No guesswork.
Availability80%
Performance45%
Quality92%
OEE33%
Illustrative figures
What you see live
Real-time monitoring for every CNC machine you run
Live machine status
Running, idle or down, plus count and rejected parts, on your phone as it happens.
OEE, worked out live
One honest number to compare machines and shifts.
Every stop on a timeline
When each machine stopped, for how long and why.
Drop alerts
A message the moment a machine falls behind.
Your floor on your phone
Status and 50+ parameters wherever you are.
Mixed fleet, one board
Old and new controllers side by side.
Cycle time, live
Cycle, loading and cutting time for each machine.
Rejects next to output
Rejected parts counted beside good parts.
Reports on time
Production reports prepared for you, shift after shift.
Trends over weeks
Patterns that one shift cannot show.
Tool life
Tool condition and remaining life per machine.
Service reminders
Reminders before a breakdown, not after.
Target lock
Hold a machine until its target is met.
Your own reports
Built around the numbers you track.
Loss charts
Graphs that show where the time went.
Cost of waiting
How much does idle time cost your shop each year?
Set the sliders to match your floor. The maths uses your own numbers, 8 hours per shift and 300 working days a year.
Estimate only, based on what you enter. It is not a promise of savings. First-year cost is the plan price before GST, plus your PC cost if you enter it.
Getting started
From order to a live board in 1 to 2 days
01
Arrange one PC
You buy one industrial PC. One PC connects many machines.
02
We connect your machines
Our team installs the software and links each machine. Installation is included.
03
Watch it live
Status, count and cycle time show up in real time.
04
Act sooner
Respond to stops while they are happening, not the next day.
Pricing
Simple pricing for real-time monitoring
Live machine status
Live OEE
Downtime with reasons
Installation included
Not included: the industrial PC, which you buy yourself. GST is added on top of the price. See the full price breakdown.
